HD300: a robust and highly efficient heavy-duty CNC sewing machine


  • sews consistently at a speed of 1.200 rpm.
  • sews up to 12" / 300 mm wide webbing in one go, or 4 x 2" / 50 mm webbing in one cycle.
  • flexible: the same machine can be used for sewing lashings, endless slings, lifting belts, winch straps, tie-down straps...
  • thanks to its configuration this sewing machine virtually doesn't stop, maximizing output at another level.




2x2

4" / 100 mm winch straps

WLL: 5.400 lbs / 2450 kgs

Fast | Reliable | Efficient


  • 3 layers of 11.000 lbs / 5T webbing, inclusive hooks and / or ratchets @1.200 rpm
  • about 3.300 stitches per bobbin
  • the operator is warned before the bobbin is empty so he can prepare the exchange = +efficiency


Flexible


  • different or the same products can be run on the left and right side
  • if you wish to use only one side: just use that side
  • typical products:
    • webbing widths: up to 12" / 300 mm
    • endless slings: overlap
  • standard maximum pattern dimensions:
    • 12" x 14" / 300 x 400 mm
    • of course, other dimensions are possible on demand
  • the machine can process piece per piece or multiple pieces at the same time


 

ARN

CNC sewing with a single template.

  • 1.200 rpm 3 layers 11.000 lbs / 5T webbing.
  • Ergonomic, Fast and Robust.
  • Flexible

 

HD-XXL

Need a big sewing area? This one does:

  • 40"x 20" or 1.000mm x 500mm.
  • Freely programmable.
  • Removable templates: while one template sews the other template is unloaded and loaded again.

 

BW006

automatic bobbin winder for:

  • Brother BAS311, BAS326 E,F,G,H series,
  • Durkopp Adler 867 3XL, Newlong DD-5,
  • Seiko CK-1, etc...

info@tmc-machines.be

Paddevijverstraat 57

8900 Ieper

+32 57 22 80 39